|
|
Post by sandyleebee62 on Feb 16, 2012 22:40:31 GMT -5
Still seeking help to bypass or totally uninstall a GM Passkey 3 security system in a 1997 Buick Park Avenue. This is NOT a Passlock or Passkey 2 security system. The key that starts this car has a transponder embedded within the rubber portion of the key...not on the key shaft. The key is also marked PK3 on the upper part of the shaft. No wires have been cut...just exposed so they can be clearly observed. Any work done must be guaranteed in writing. Please...serious, experienced replies ONLY! Leave a pm or call 740-742-3011, leave message and contact number. Thanks.
|
|
|
|
Post by hotrod on Feb 17, 2012 19:06:03 GMT -5
hi same prob hear but was a 97 pontiac lost the keys and replaced the switch the only thing i could find after lots of reserce was i think to turn the key to start position for 10-15 sec and off position for 5-10 sec do this i think 3 times and the computer is supposed to reset it self i dont know if it works or not i changed the whole ing switch with key tummbler and it started good luck hope it works if not probablly have to take it to a dealer to reprograme the anti-theft stuff also there mightbe a yellow wire that says airbag stay away from that anyway hope it works and try at your own risk
|
|
|
|
Post by sandyleebee62 on Feb 20, 2012 22:56:17 GMT -5
Thanks for all the info. Yes, we have tried everything and done alot of research, too. We haven't changed the ignition assembly yet but that's probably next on the list. Glad you got yours fixed, though. Have a good day.
|
|
